Operation Manual

Appendix
A31003-P3010-U105-16-7619, 03/2014
120 myAttendant, User Guide
Features of the UC Clients that can be used with SIP Telephones
8 Appendix
The appendix contains reference information such as a list of features that can be
used with SIP phones, for example.
Related Topics
8.1 Features of the UC Clients that can be used with SIP Telephones
The following features of the UC clients myAttendant, myPortal for Desktop and
myPortal for Outlook can be used with SIP telephones.
The used SIP telephone must satisfy the following prerequisites:
• 3PCC as per RFC 3725 is supported.
• The "Call waiting" feature is supported.
• Do Not Disturb is disabled.
Alternatively, for subscribers with SIP phones, DND can be activated in the
communication system.
INFO: The full functionality of the features depends on the SIP
phone used and cannot be guaranteed.
A successful test of the following features was performed with
OpenStage 15 S.
• Connection-/call-oriented features:
– Make Call
– Redirect Call
– Resume call
– Application-controlled conference
– Place call on hold
– Alternate (Toggle/Connect)
– Consultation
– Disconnect
– Transfer
• Phone-oriented features:
– Do Not Disturb
– Call forwarding
Related Topics