Operation Manual

Unified Communications
A31003-P3010-U105-16-7619, 03/2014
58 myAttendant, User Guide
Conferences
5.10.1.6 How to Remove Conference Participants
Prerequisites
• A conference with you as the conference controller has been started in the
virtual conference room.
Step by Step
› Select one of the following options in the context menu of the relevant
conference participant:
• If the conference participant is currently active, click Remove.
• If the conference participant is not currently active in the conference, click
on Disconnect > Disconnect and Remove Participant.
The connection to the participant is cleared, and the participant is removed from
the conference.
Related Topics
5.10.1.7 How to Expand a Call into an Ad-hoc Conference (not possible with OpenScape
Office)
Prerequisites
• You are working with the classic user interface.
• You are conducting a call.
• The screen pop (pop-up window) for incoming or outgoing calls is enabled.
• You have a UC Suite Conference license.
Step by Step
1) During the call, click in the Inbound Call or Outbound Call screen pop on the
Expand Call to Conference symbol. The AdHoc Conference window opens
with you set as the conference controller.
2) Add the conference participants by one of the following methods:
• From the Favorites list:
Using the mouse, drag one of the participants from the Favorites into the
AdHoc Conference window. Select a station number from the Number
To Contact drop-down list in the Select Participant Contact Number
window and click OK.
• From a directory:
Using the mouse, drag one of the participants from the Directories into
the AdHoc Conference window. Select a station number from the
Number To Contact drop-down list in the Select Participant Contact
Number window and click OK.