User Manual

SINAMICS G120 CU230P-2 Control Units

List Manual (LH9), 04/2014, A5E33838102B AA

2 Parameters

2.1 Overview of parameters

Access level

Specifies the minimum access level required to be able to display and change the relevant

parameter. The required access level can be set using p0003.

The system uses the following access levels:

• 1: Standard (not adjustable, included in p0003 = 3)

• 2: Extended (not adjustable, included in p0003 = 3)

• 3: Expert

• 4: Service

Parameters with this access level are password protected.

CU230P-2_HVAC

(PM330)

CU230P-2 with RS485 interface and PM330

CU230P-2_PN CU230P-2 with PROFINET interface

CU230P-2_PN

(PM330)

CU230P-2 with PROFINET interface and PM330

PM230 Power Module for pumps and fans (3 AC 400 V)

PM240 Power Module for standard applications with dynamic braking (3 AC 400 V)

PM250 Power Module (3 AC 400 V with energy recovery)

PM260 Power Module (3 AC 690 V with energy recovery)

PM330 Power Module for pumps and fans

Table 2-1 Information in the "CU/PM variants" field, continued

CU/PM variants Meaning

Note

Parameter p0003 is CU-specific (belongs to the Control Unit).

A higher access level will also include the functions of the lower levels.