User Manual

ManualsBrandsSiemens ManualsVariable Speed DriveSINAMICS G120 Control Units CU230P-2 Parameter Manual

2 Parameters

2.2 List of parameters

SINAMICS G120 CU230P-2 Control Units

230 List Manual (LH9), 04/2014, A5E33838102B AA

Description: Displays the identified total leakage inductance.

Index: [0] = Phase U

[1] = Phase V

[2] = Phase W

Description: Displays the nominal stator inductance identified.

Index: [0] = Phase U

[1] = Phase V

[2] = Phase W

Description: Displays the identified IGBT threshold voltage.

Index: [0] = Phase U

[1] = Phase V

[2] = Phase W

Description: Displays the identified effective valve lockout time.

Index: [0] = Phase U

[1] = Phase V

[2] = Phase W

Description: Displays identified rotor resistance (on separately excited synchronous motors: damping resistance).

Index: [0] = Phase U

[1] = Phase V

[2] = Phase W

r1914[0...2] Identified total leakage inductance / L_total_leak ident

Access level: 4 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- [mH] - [mH] - [mH]

r1915[0...2] Identified nominal stator inductance / L_stator ident

Access level: 4 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- [mH] - [mH] - [mH]

r1925[0...2] Identified threshold voltage / U_threshold ident

Access level: 4 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- [Vrms] - [Vrms] - [Vrms]

r1926[0...2] Identified effective valve lockout time / t_lock_valve id

Access level: 4 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- [µs] - [µs] - [µs]

r1927[0...2] Identified rotor resistance / R_rotor ident

Access level: 4 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- [ohm] - [ohm] - [ohm]