User Manual

2 Parameters

2.2 List of parameters

SINAMICS G120 CU230P-2 Control Units

408 List Manual (LH9), 04/2014, A5E33838102B AA

Description: Setting parameter for the run sequence of instance XOR 2 within the run-time group set in p20072.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

Description: Sets the signal source of input quantities I0, I1, I2, I3 of instance XOR 3 of the XOR function block.

Index: [0] = Input I0

[1] = Input I1

[2] = Input I2

[3] = Input I3

Description: Display parameter for binary quantity Q of instance XOR 3 of the XOR function block.

Description: Setting parameter for the run-time group in which the instance XOR 3 of the XOR function block is to be called.

Value: 1: Run-time group 1

2: Run-time group 2

3: Run-time group 3

4: Run-time group 4

5: Run-time group 5

6: Run-time group 6

9999: Do not calculate

Description: Setting parameter for the run sequence of instance XOR 3 within the run-time group set in p20076.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

p20073 XOR 2 run sequence / XOR 2 RunSeq

Access level: 3 Calculated: - Data type: Unsigned16

Can be changed: T Scaling: - Dyn. index: -