User Manual

2 Parameters

2.2 List of parameters

SINAMICS G120 CU230P-2 Control Units

414 List Manual (LH9), 04/2014, A5E33838102B AA

Description: Display parameter for the difference Y = X1 - X2 of instance SUB 0 of the subtractor.

Description: Setting parameter for the run-time group in which instance SUB 0 of the subtractor is to be called.

Value: 5: Run-time group 5

6: Run-time group 6

9999: Do not calculate

Description: Setting parameter for the run sequence of instance SUB 0 within the run-time group set in p20104.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

Description: Sets the signal source of minuend X1 and subtrahend X2 of instance SUB 1 of the subtractor.

Index: [0] = Minuend X1

[1] = Subtrahend X2

Description: Display parameter for the difference Y = X1 - X2 of instance SUB 1 of the subtractor.

r20103 CO: SUB 0 difference Y / SUB 0 difference Y

Access level: 3 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: PERCENT Dyn. index: -