User Manual

List of Parameters

Parameters

1-431

SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 06/2011

Description: Setting parameter for the run-time group in which instance RSR 0 of the RS flipflop is to be called.

Value: 1: Run-time group 1

2: Run-time group 2

3: Run-time group 3

4: Run-time group 4

5: Run-time group 5

6: Run-time group 6

9999: Do not calculate

Description: Setting parameter for the run sequence of instance RSR 0 within the run-time group set in p20191.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

Description: Sets the signal source for set input S and reset input R of instance RSR 1 of the RS flipflop.

Index: [0] = Set S

[1] = Reset R

Description: Display parameter for output Q of instance RSR 1 of the RS flipflop

Description: Display parameter for inverted output QN of instance RSR 1 of the RS flipflop.

p20191 RSR 0 run-time group / RSR 0 RTG

Access level: 3 Calculated: - Data type: Integer16

Can be changed: T Scaling: - Data set: -