User Manual

Index
C-724
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 06/2011
2522
Status word, speed controller, 2-558
2526
Status word, closed-loop control, 2-559
2530
Status word, current control, 2-560
2534
Status word, monitoring functions 1,
2-561
2536
Status word, monitoring functions 2,
2-562
2537
Status word, monitoring functions 3,
2-563
2546
Control word, faults/alarms, 2-564
2548
Status word, faults/alarms 1 and 2, 2-565
2634
Sequence control - Missing enable sig-
nals, 2-566
3010
Fixed speed setpoints, binary selection
(p1016 = 2), 2-568
3011
Fixed speed setpoints, direct selection
(p1016 = 1), 2-569
3020
Motorized potentiometer, 2-570
3030
Main/supplementary setpoint, setpoint
scaling, jogging, 2-571
3040
Direction limitation and direction reversal,
2-572
3050
Skip frequency bands and frequency limi-
tations, 2-573
3060
Basic ramp-function generator, 2-574
3070
Extended ramp-function generator, 2-575
3080
Ramp-function generator selection, status
word, tracking, 2-576
6030
Speed setpoint, droop, 2-582
6031
Pre-control balancing, acceleration mod-
el, 2-583
6040
Speed controller, 2-584
6050
Kp_n/Tn_n adaption, 2-585
6060
Torque setpoint, 2-586
6220
Vdc_max controller and
Vdc_min controller (Vector control,
PM230/PM240), 2-587
6300
V/f characteristic and voltage boost,
2-578
6310
Resonance damping and slip compensa-
tion, 2-579
6320
Vdc_max controller and
Vdc_min controller (V/f control,
PM230/PM240), 2-580
6490
Speed control configuration, 2-588
6491
Flux control configuration, 2-589
6630
Upper/lower torque limit, 2-590
6640
Current/power/torque limits, 2-591
6710
Current setpoint filter, 2-592
6714
Iq and Id controllers, 2-593
6721
Id setpoint (PEM, p0300 = 2), 2-594
6722
Field weakening characteristic, Id setpoint
(ASM, p0300 = 1), 2-595
6723
Field weakening controller, flux controller
(ASM, p0300 = 1), 2-596
6724
Field weakening controller
(PEM, p0300 = 2xx), 2-597
6730
Interface to the Power Module
(ASM, p0300 = 1), 2-598
6731
Interface to the Power Module
(PEM, p0300 = 2xx), 2-599
6
799
Display signals, 2-600
7017
DC brake (p0300 = 1), 2-623
7200
Run-time groups / Sampling times, 2-602