Specifications

3.2 Assembly of the SINUMERIK 810D

3-40

SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition

DC link

rails

CCU3

CCU box

PE conductor connection

Battery

–X307

Fig. 3-3 Assembly of the SINUMERIK 810D

Pay attention to the following when installing the SINUMERIK 810D:

1. Cooling clearance top and bottom, approx. 100 mm

2. The shields of the motor cables must be connected after mounting the

shield sheet, see section 2.1.3.

3. The equipotential bonding conductor must be connected for each motor.

4. Additional mounting depth is required for mounting the connector.

5. The tightening torque of the screws must be complied with.

6. The screws of the DC link busbars must all be tightened.

Installation

instructions

3 Desi

n and Installation of the 810D