Specifications

5.1 Axis expansion plug-in unit

5-78

SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition

Note

On LT modules more than 50 mm wide and a permanently mounted device

bus, the free end of the device bus must be fixed to the 34-pole device bus

connector on the module.

SIMODRIVE 611

power module

Axis expansion

plug-in unit

Fig. 5-2 Mounting the axis expansion plug-in unit in the power module

The axis expansion plug-in module has two connectors X301 and X302.

Connector X301 must be connected to a 1-axis power module when used. If a

2-axis power module is used, connector X301 must be assigned to the first axis

and connectors X302, to the second axis.

Connecting

the ribbon cable

connector

5 Axis Ex

ansion