Specifications

5.1 Axis expansion plug-in unit

5-79

SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition

Table 5-1 Connection of the ribbon cable connector to the axis expansion plug-in

unit

Ribbon cable connector 1-axis power module 2-axis power module

X301 1st axis 1st axis

X302 Unassigned 2nd axis

1. Bring in and connect the ribbon cable for connector X301 through the slot in

the front panel with the notch facing forward.

2. If applicable, also attach the ribbon cable for connector X302 accordingly

(for 2nd axis).

Ribbon cable

X301

X302

Notch

Sheet-metal cover Axis expansion plug-in unit

Front panel

301 302

Fig. 5-3 Connection of the ribbon cables to the axis expansion

3. After plugging in the axis expansion plug-in unit and connecting to the CCU,

you should push the excess cable length in the space provided for that pur-

pose under the sheet-metal cover of the axis expansion plug-in unit.

Installation

5 Axis Ex

ansion