Specifications

5.2 Axis expansion with SIMODRIVE 611D control plug-in unit

5-80

SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition

5.2 Axis expansion with SIMODRIVE 611D control plug-in

unit

Axis expansion with SIMODRIVE 611D control plug-in unit is only used if the

number of measuring channels of the SINUMERIK 810D is insufficient, or

higher performance is required.

The SIMODRIVE 611D module must be inserted as the first module to the right

of the SINUMERIK 810D. If DC link busbars are connected, all screws must be

tightened firmly (comply with tightening torque, see figure 3-4).

A special set of cables is required to connect the SIMODRIVE 611D control

module. This cable set contains the connection with the drive bus and another

device bus cable.

SIMODRIVE

810D

(CCU3)

LDCPower supply

(I/R or OI)

SIEMENS

611D control plug-in unit

Cable set:

Device bus and drive bus

Fig. 5-4 Axis expansion for SINUMERIK 810D with the SIMODRIVE 611D module

Application

Mounting

Connection

5 Axis Ex

ansion