Specifications

6.1 Single I/O module

6-90

SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition

X404

X405

X406

X3 IN X3 OUT

32 inputs 0 to 31

32 inputs 32 to 63

32 outputs 0 to 31

This results in the following address space:

1. Input range

Input byte (chain number *32) to (chain number *32) +7, i.e. from input byte

32 to input byte 39 for operation in chain 1

2. Output range

Output byte (chain number *32) +8 to (chain number *32) +11, i.e. from out-

put byte 40 to output byte 44 for operation in chain 1

Only one I/O module is possible per chain.

The address range is assigned automatically during startup. Parameterization is

not required.

In HW Config, it is possible to treat the 810D I/Os as the equivalent arrange-

ment of S7-300 modules.

SINUMERIK 810D

with

integrated PLC

X111

Chain 1

Chain 3

Chain 2

P-bus

Single I/O

module

Single I/O

module

Single I/O

module

Fig. 6-3 SINUMERIK 810D with 3 I/O chains (max. configuration)



6 I/O Modules