User's Manual

Page 2 MultiRanger 100/200 – INSTRUCTION MANUAL 7ML19981FB06
mmmmm
MultiRanger 100/200
If you have any questions, comments, or suggestions about the manual contents, please
email us at [e-mail].
For the complete library of Siemens Milltronics manuals, go to
www.siemens.com/processautomation
.
Manual Symbols
Please note their use carefully.
Configuration Examples
The configuration examples used in this manual illustrate the versatility of the
MultiRanger. Because there is often a range of ways to approach an application, other
configurations may also apply.
In all examples, substitute your own application details. If the examples do not apply to
your application, check the applicable parameter reference for the available options.
Should you require more information, please contact your Siemens Milltronics
representative. For a complete list of Siemens Milltronics representatives, go to
www.siemens.com/processautomation
.
Alternating Current
Direct Current
Earth (ground) Terminal
Protective Conductor Terminal
Caution (refer to instructions)
Infra-red communication port on front of instrument
RJ-11 communications port
No co-axial cable connections