User's Manual

Page 198 MultiRanger 100/200 – INSTRUCTION MANUAL 7ML19981FB06
mmmmm
Parameters
P791 Hardware Error Code
Indicates the precise cause of Fail or ERR1 condition from P790.
P792 Hardware Error Count
A count that increments by 1 each time Fail is reported in P790 (Hardware Error).
P794 SmartLinx Module Type
This parameter is used to identify the module type when SmartLinx is used. If you are not
using SmartLinx, this parameter is not functional. Please see the associated SmartLinx
instruction manual for a full description of this parameter.
P795 SmartLinx Protocol
This parameter is used to identify the protocol when SmartLinx is used. If you are not
using SmartLinx, this parameter is not functional. Please see the associated SmartLinx
instruction manual for a full description of this parameter.
Primary Index Global
Values
0*No error
8 No SmartLinx card installed
Any
other
value
Error code; provide this code to your Siemens
Milltronics representative for troubleshooting
Related • P790 Hardware Error
Primary Index Global
Values
Range: 0 to 9999
Error count; provide this number to your Siemens Milltronics repre-
sentative for troubleshooting.
Related • P790 Hardware Error