Operation Manual

Making calls with multiple lines 131
Direct station selection keys
Apart from line keys, administrator can also configure direct station selection
(DSS) keys. You can use a DSS key to call an internal station directly, pick up
calls for this station or forward calls directly to it.
Calling a station directly
You cannot use DSS if the user is on another call (flashing LED).
Calling from the idle menu
Press the relevant DSS key.
or
Press the key shown until the "Overview" tab is active.
Select and confirm the DSS line. The key lights up and the connection is estab-
lished via the primary line.
Consultation with the DSS station
Prerequisite: You are conducting a call and your administrator has configured
the DSS key for consultation.
Press the relevant DSS key for the consultation. The key lights up and a connec-
tion is established. If the station answers, you can toggle, transfer the first call or
initiate a conference.
Phone
DSS call 1
Administrator can configure the DSS key so that the connection is also es-
tablished when the DSS station has activated "Do not disturb" or call for-
warding.
If administrator has configured transfer instead of consultation, you can
only transfer the current call to the DSS station.