Operation Manual

180 Video function
Video function
You can connect a USB camera to your OpenScape Desk Phone IP 55G so that
during a call you can see the other call partner, assuming he or she has also con
-
nected a camera, and vice versa (see  Page 32). The video function is dis-
abled by default ( Page 183) as it is not yet fully supported by all telephone
systems.
Prerequisite: A suitable USB camera is connected and the video function has
been approved by the administrator and activated by you (
 Page 183).
Activating and deactivating the function temporarily
You can activate and deactivate the video function temporarily via softkeys in
idle mode.
Confirm with the softkey to disable.
or
. Confirm with the softkey to enable.
Self view
Prerequisite: The phone is in idle mode.
In order to test whether your USB camera is working properly, activate the Self
view function via the softkey (see also
 Page 32).
Select the softkey to confirm. You will see a video image of yourself and your
surroundings on the display for approx. 10 seconds.
Video off
Video on
Self view