System information

Configuring Polycom RMX Systems to Interoperate with Siemens OpenScape
Polycom, Inc. 6–15
12 Click the Security tab and modify the following fields:
If the Authentication User Name and Authentication Password fields are left
empty, the SIP Digest authentication request is rejected. For registration
without authentication, the RMX must be registered as a trusted entity on the
SIP server.
Server Domain
Name
Enter the name of the domain that you are using for
conferences, for example:
user_name@domain name
The domain name is used for identifying the SIP server in the
appropriate domain according to the host part in the dialed
string.
For example, when a call to [e-mail] reaches its
outbound proxy, this proxy looks for the SIP server in the
polycom.com domain, to which it will forward the call.
When this call arrives at the SIP server in polycom.com, the
server looks for the registered user (EQ1) and forwards the
call to this Entry Queue or conference.
Port Enter the number of the TCP or UDP port used for listening.
The port number must match the port number configured in
the SIP server.
The default port is 5060.
Outbound Proxy Servers: Primary / Alternate Server Parameter
Server IP
Address
By default, the Outbound Proxy Server is the same as the
SIP Server. If they differ, modify the IP address of the
Outbound Proxy and the listening port number (if required).
Note: When in IPv4 & IPv6 or in IPv6 mode, it is easier to use
Names instead of IP Addresses.
Port Enter the port number that the outbound proxy is listening to.
The default port is 5060.
Field Description
Field Description
Authentication
User Name
Enter the conference, Entry Queue, or Meeting Room name
as registered with the proxy.
This field can contain up to 20 ASCII characters.
Authentication
Password
Enter the conference, Entry Queue, or Meeting Room
password as defined in the proxy.
This field can contain up to 20 ASCII characters.