System information

Configuring Polycom RMX Systems to Interoperate with Siemens OpenScape
Polycom, Inc. 6–17
2 Modify the following field:
IP Network Monitoring
The Signaling Monitor is the RMX entity used for monitoring the status of
external network entities such as the gatekeeper, DNS, SIP proxy, and
Outbound proxy and their interaction with the MCU.
To monitor signaling status:
1 In the RMX Management pane, click Signaling Monitor.
2 In the Signaling Monitor pane, double-click Default IP Service.
The RMX CS IP tab displays the following fields:
Field Description
Speed The RMX has 3 LAN ports on the RTM-IP (Management, Signaling,
and Shelf Management), and additional LAN ports on each media
card (RTM LAN) and RTM ISDN cards. The administrator can
manually set the speed and transmit/receive mode for these ports.
Port The LAN port number.
Note: Do not change the automatic setting of Port 1,4
and Port 5 of the Management 2 and Signaling 2
Networks. Any change to the speed of these ports will
not be applied.
Speed Select the speed and transmit/receive mode for each
port.
Default: Auto — Negotiation of speed and
transmit/receive mode starts at 1000 Mbps Full Duplex,
proceeding downward to 10 Mbps Half Duplex.
Note: To maximize conferencing performance,
especially in high bit rate call environments, a 1 Gb
connection is recommended.
Field Description
Service
Name
The name assigned to the IP Network Service by the Fast
Configuration Wizard.