System information

Polycom Unified Communications Deployment Guide for the OpenScape Solution of Siemens Enterprise Communciations
6–22 Polycom, Inc.
When started with Version 7.0 installed, the RMX enters MPM+ mode by
default, even if no media cards are installed:
• The RMX only switches between MPM+ and MPMx Card Configuration
Modes if MPM+ or MPMx cards are removed or swapped while it is
powered on.
• The Card Configuration Mode switch occurs during the next restart.
• Installing or swapping MPM+ or MPMx cards while the system is off will
not cause a mode switch when the system is restarted - it will restart in the
Card Configuration Mode that was active previous to powering down.
Card Configuration
Mode
Indicates the MCU configuration as derived from the
installed media cards:
•MPM+ — Only MPM+ cards are supported. MPMx
cards in the system are disabled.
•MPMx — Only MPMx cards are supported. MPM+
cards in the system are disabled.
Information Description