Specifications

Administration
A31003-S2000-M102-6-76A9, 26/08/2010
3-100 Asterisk - OpenStage Family, Administration Manual
administration.fm
Transferring Phone Software, Application and Media Files
3.11.3 Phone Software
The firmware for the phone can be updated by downloading a new software file to the phone.
3.11.3.1 FTP/HTTPS Access Data
If the default FTP/HTTPS Access settings (see Section 3.11.2, “Common FTP/HTTPS Set-
tings”) are to be used, Use default must be set to "Yes", and only the Filename must be spec-
ified.
Data required (in every case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: "Yes", "No"
Default: "No"
• Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS"
Default: "FTP"
• FTP Server address: IP address or hostname of the FTP/HTTPS server in use.
• FTP Server port: Port number of the FTP/HTTPS server in use.
Default: 21
• FTP account: Account at the server (if applicable).
• FTP username: User name for accessing the server.
• FTP password: Password corresponding to the user name.
• FTP path: Path of the directory containing the files.
• HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
7
Do not disconnect the phone from the LAN or power unit during software update. An
active update process is indicated by blinking LEDs and/or in the display.