Quick Start Guide

Optiset E Local Power Supply

The Local Power Supply is required for the Analog Adapter. It

may also be required in other situations, depending on the

Optiset E telephone’s configuration, the type of phone cable

used, the length of the phone cable from the communications

server, and the type of communications server used. Only one

Optiset E Local Power Supply can be used at a time on an

Optiset E phone. However, one Local Power Supply can be

used on a primary phone and a second Local Power Supply can

be used on a secondary phone attached to the primary phone

through a Phone Adapter.

Installation of Local Power Supply

To install a local power supply:

1. Disconnect the phone line from the wall jack. New phones

should have a line cord attached to the phone, but may not be

plugged into the wall jack. Plug the line cord

➀

running from

the phone into the jack on the power supply labeled .

2. Plug one end

➁

of the additional line cord that came with the

power supply into the jack labeled .

3. Plug the other end

➂

of the additional line cord into the wall

jack, or into the Optiset E Phone Adapter installed in another

phone.

4. Plug the power supply

➃

into a properly grounded 120 VAC

electrical outlet.

Digital

II3.AI

Digital

Advance Pl