Quick Start Guide

14
You can press the Program key, if one appears on your phone,
to reach the Program/Service? prompt.
Also notice the service code numbers in the lower left of the
subprompts available through the Program/Service prompts.
From the Program/Service prompt, you can dial these numbers
to go directly to these submenus. Similarly, the subsections
within the submenus have numerals that you can dial to go to
those subsections.
Audio Settings?
(also available from the Program/Service
menu) lets you adjust the following audio settings for your
phone: ring volume, ring tone, alert tone volume, and
speakerphone mode.
Feature Keys and Access Codes
You can also press feature keys to gain access to Siemens
telephone system features such as Hold, Transfer, Mailbox, and
Program. Since your phone has already been assigned a set of
feature keys, it may not have some of the feature keys described
here. However, you may still use any feature available on your
system and permitted by your class of service by dialing its
feature access code, if it has one. This guide explains the basic
steps for using many features, including the default feature
access codes. Your system administrator may have configured
both the acronyms for feature keys and the access codes
differently from how they appear here.
Volume Keys
Use the Volume Up and Volume Down keys to adjust
the voice volume of your telephone. While on a call, press
to raise the volume of the voice you are hearing, or press
to
lower it. Press either key until you reach the desired voice level.
Holding down either key only changes the volume one step.
When you hang up or switch to another call, the voice volume
returns to the default level. Or you can store the new setting to
override the default setting before hanging up, by pressing the
(Select) key or by pressing the and
keys
together, before you hang up.
PROGRAM/SERVICE
>
1-Change destinations?
+
-
+
-
✓
+
-