User Manual

Portal page design and basic data
Switch tenant
5
A6V10500249_en--_f 23 | 57
5.2 Switch tenant
A tenant is a closed area in the portal. A cloud-based application can be
individualized per tenant and completed to the outside world.
You must be assigned more than one area to switch a tenant.
The following tenants are available on the portal:
Tenant Web server
Siemens Metering M-bus web server WTV676
Siemens Proxy Web server OZW772 or OZW672
Perform the following steps to switch the tenant:
◈
Click the "Select tenant" button.
 Opens up a drop-down list of the possible tenants.
◈
Select the desired tenant.
5.3 Change language
The portal is available in various languages. The settings affect the web server
display language (see note below).
1. Click "Select language" button.
 A drop-down list opens with available portal language.
2. Select the desired language.
NOTICE
The web server language follows the
portal language
Enter your language in the portal before accessing the web server with web
access. Web server immediately takes over the selected language.