Commissioning Instructions

113 / 176
Siemens Web server OZW772... V6.0 CE1C5701en
Building Technologies Communications 2015-10-12
The Web Server can communicate directly with the fixed IP address or domain if a
fixed IP address or domain (e.g. www.myname.com
) is available for the Internet
connection.
For dynamic IP addresses, the Internet provides free-of-charge Dynamic DNS
services that connect user-defined domain names to dynamic IP addresses. The
router must support Dynamic DNS to use this function.
To use the Dynamic DNS service, a new account must be set up at the respective
provider.
The router must inform the service of changes to the dynamic IP address for the
Web Server to communicate via the Dynamic DNS service setup. Set up the router
Dynamic DNS as follows:
· Dynamic DNS: On
· Service provider: Service provider.
· Domain name Domain = Host name (own name).
· User name: User name for the Dynamic DNS account (e.g.
MyUserAccount).
· Password: Password for Dynamic DNS account.
HTTPS encryption via port 443 is also supported. The required certificate is not
accredited. The self-signed certificate from Siemens is valid for 20 years and is
installed on the Web Server. The certificate must be installed on the web browser
for encrypted communications.
One own certificate must be installed for each Web Server.
The web browser security warning is displayed the first time you connect via
the https address. The page continues to load contrary to the web browser
recommendation.
The certificate must now be installed: A context-sensitive installation routine
is available depending on web browser used.
The warning "Certificate error" remains for individual web browsers even after
the certificate is successfully installed. Transmission is nevertheless secure.
Dynamic DNS
Dynamic IP address
Registration
Report dynamic address
Encrypted connection
(HTTPS)
Note
Principal workflow
Note