Commissioning Instructions

29 / 176
Siemens Web server OZW772... V6.0 CE1C5701en
Building Technologies Commissioning 2015-10-12
Data point Explanation, example
Message receiver 1…4
Def' value: (message receiver x)
Setting values: max. 20
characters
Message receiver 1…4 is a name (text) and
is displayed in the web browser. You must
run "generate" to display the change (for the
workflow, see Section "Refresh device web
pages" in Section 2.4).
—
Receiver type
Default value: ---
Setting values: --, E-mail
All Receiver types are available:
"---": No messages to this message receiver.
"E-mail": Configure message receiver for e-
mail.
—
Fault priority
Default value: All
Setting values: All,
Only urgent ones
The setting value "Only urgent ones" acts as
a filter for sending fault messages.
—
Email address
Default value: message receiver
@example.com
Setting values:max. 49characters
The setting value must match the e-mail
address of the message receiver.
—
Number of messages for
send
Number of messages to be transmitted at
next send.
— —
The number of messages pending is available under "Number of messages for
sending".
A time frame can be defined during which messages can be sent for each receiver.
· The following settings are optional when restricting the time for sending
messages (default settings: No restriction).
· In general: Messages occurring outside the send periods are sent afterwards if
still pending during the send period.
Path: Home > 0.2.150 OZW772.xx > Message receiver > Message receiver 1…4
> Send messages
You can define time periods per weekday or special day when messages can be
sent to the message receivers.
Special days are defined via Holidays/special days.
Data point
Explanation, example
Monday...Sunday,
Special day
Default val: Monday, 00:00
On …
Special day,
00:00 On …
Setting val: Monday - Sunday,
Special day
00:00 - 24:00 Off/on
Each message receiver is assigned a time
switch to program max. 3 transmission times
for each weekday, i.e. periods during which
the Web Server can send messages.
The default value sends messages
throughout the entire period.
Send messages
Notes