Commissioning Instructions

75 / 176
Siemens Web server OZW772... V6.0 CE1C5701en
Building Technologies Record consumption data 2015-10-12
Meter data is mapped in the Web Server based on information from Synco devices
entered and generated under Device web pages.
The entire data set for the meter is moved when replacing a meter from the "Meter
data" area to "Meter replacement".
In generation, the "Meter replacement" function ensures that last available values
for any meter is retained even for billing purposes even after replacement.
· The entire "Meter replace" area can be deleted (see Section 2.5.3.6,
"Consumption data").
· 2-year old data is deleted automatically.
6.1.2 Meter data in detail
Data for device information, including meter name (data field B) are mapped to
the Web Server based on information from the Synco devices immediately after
generating.
Must be re-generated if settings are changed to integrated Synco devices.
Meter information, not including meter name (data field C), current values (D),
meter status (E), last due date (F1) and calendar monthly values (G) are collected
at the QAX9… or on the Synco 700 controller (not E and not F1) and then retrieved
by Web Server.
Data in the section on meter status (E) are specific to the manufacturer for M-bus
meters.
Meter data
Meter exchange
Notes
QAX / Synco 700 data
Note
QAX / Synco 700
mapping
Note
Key for data fields:
A Web Server data (plant)
B Device information
(incl. meter name)
C Meter information
(excl. meter name)
D Current values
E Meter state
F1 Last due day
F2 Last but one due day
G Calendar monthly values
H Start value Web Server
T Header
U Information lines
V Footer