Commissioning Instructions

82 / 176
Siemens Web server OZW772... V6.0 CE1C5701en
Building Technologies "Energy indicator" function 2015-10-12
7.1.3 Synco product range
The following KNX devices from the Synco range can be connected to the
OZW772… Web Server.
Synco devices Data sheet no.
Universal controller RMU7x0, RMU7x0B
N3144, N3150
Heating controller RMH760, RMH760B
N3131, N3133
Boiler sequence controller RMK770
N3132
Central control unit RMB795, RMB795B
N3121, N3122
Switching & monitoring unit RMS705, RMS705B
N3123, N3124
Room unit QAW740
N1633
Room controller RXB21.1, RXB22.1
N3873
Room controller RXL21.1, RXL22.1
N3877
Room controller RXB24.1
N3874
Room controller RXL24.1
N3878
Room controller RXB39.1/FC-13
N3875
Room controller RXL39.1/FC-13
N3876
Room thermostat for fan coils RDG100KN
RDG160KN,
RDG165KN
N3191
Room thermostat for VAV RDG400KN
N3192
Room thermostat for fan coils RDF301
N3171
Room thermostat for fan coils and lighting RDF301.50
N3171
Room thermostat for fan-coil RDF600KN
N3171
Touchscreen thermostat for fan-coil RDF800KN
N3174
Touchscreen thermostat for fan-coil RDD810KN/NF
N3175
Room thermostat for VAV RDU341
N3172
Central apartment unit QAX903
N2741
Central apartment unit QAX910
N2707
Central apartment unit QAX913
N2740
The "Energy indicator" function is supported in all Synco devices (see table above)
excepting:
Synco 700: RMU7x0, RMH760, RMK770 V1, RMS705
Synco living: QAX910 V1 und V2
If the "Device description" of a device contains "Energy indicator" data points and
"Green limits", the device can be operated on the "Energy indicator" function.
"Energy indicator" data points and "Green limits" have predefined, device-specific
default values. The default values can be changed with a few notable exceptions.
Neither number nor selection of the "Energy indicator" data points and "Green
limits" that exist in the "Device description" can be changed.
Synco range
Synco 700
Synco RXB/RXL
Synco
RDG/RDD/RDF/RDU
Synco living
Important note
Device description