Basic Documentation

Entering Synco IC
Delete plant and own profile
4
20 | 57 A6V10500249_en--_f
4.5 Delete plant and own profile
Only plants for OZW can be deleted in Synco IC.
Plants for WTV676 cannot be deleted via Synco IC, rather only directly on the M-
bus web server.
Additional information on query interval is available in the M-bus web server
user's guide (Document A6V11157985), see "Reference documentation [➙ 9]".
As the user, only delete plants as an exception.
For example, only if web server is defective and out of service.
Correctly disconnect to the plant
The correct procedure if multiple users are entitled to delete the plant and one user
wants to only disconnect the plant is as follows: The second user disconnects the
plant of the first user by deleting the user.
The other user loses the connection to the plant as depicted to the right.
Delete a plant (OZW only)
Proceed as follows to delete a plant:
1. In the primary navigation, go to "Administration".
2. In the plant overview, click the name of the plant for delete.
3. In secondary navigation, go to "Plant Settings".
4. Click "Delete".
5. Observe all the cautions!
6. Click "Yes" to confirm.