Commissioning Instructions

146 / 184
Siemens Web server OZW772... V8.0 CE1C5701en
Building Technologies KNX S-Mode 2018-03-15
The web server OZW772... also assumes the KNX interface (KNXnet/IP) using its
built-in Ethernet interface.
Separate devices to connect the ETS to the KNX bus via Ethernet are no longer
necessary.
Web server OZW772… supports the ETS diagnostic function "Group Monitoring"
as of version 6.
You can securely connect to the web server (as of V7.0) with ETS and the Remote
Tool Access software via the Synco IC portal (see Section 3.3).
Abbr.
Meaning
DP
Data point
DPT
Data point type.
ETS
Engineering Tool Software.
KNX
Konnex
S-mode
System mode (communication mode in KNX networks).
Addition information on KNX and Synco devices with S-Mode data points can be
found in document CE1Y3110.
KNX interfaces
Group monitoring
With web servers
as of V7.0
Acronyms
Additional information