Commissioning Instructions

114 / 176
Siemens Web server OZW772... V6.0 CE1C5701en
Building Technologies Communications 2015-10-12
8.2 Messages via e-mail
SMTP is used to send fault messages, Energy indicator, system reports and Trend
and consumption data via e-mail. The mail server (SMTP server, outgoing mail
server) must be known to the Web Server to send e-mails to the Receivers (see
Section 2.5.3.3 "Communication", E-mail).
OZW772.01
Ethernet
TCP/IP
Internet
DSL router
Email received
DSL router
DNS server
Mail server
mail.bluewin.ch
Email address of sender
e.g. [e-mail]
Email address receiver
e.g. [e-mail]
IP address: 192.168.2.10
Subnet address: 255.255.255.0
Standard gateway: 192.168.2.1
DNS server 1: 192.168.2.1
Email
PC
Prerequisites for sending e-mails via Internet:
· An e-mail account is available and set up
(see Section 11.3.2, Free e-mail account providers ).
· Internet access is set up for the Web Server (see Section 8.1.3).
· The settings for "E-mail", "Message receiver 1…4", "System report"
or "Consumption data > Receiver" are made (see Section 2.5.3.3).
E-mail outline depends on message type and content.
In the listing below:
· User settings are in bold.
· The path for user settings starts each time with:
Home > 0.2.252 OZW772.16 > Settings > …
· Set components of the e-mail are in italics.
E-mail
Example of an e-mail
(fault message)
Example of an e-mail
(consumption data)