Commissioning Instructions

84 / 176
Siemens Web server OZW772... V6.0 CE1C5701en
Building Technologies "Energy indicator" function 2015-10-12
7.2 "Energy indicator" function levels
The contents of the "Energy indicator" function are distributed across 2 or 3 levels
depending on the functionality of the respective device.
· Simple devices have 2 levels:
– "Plant"
– "Data points"
· Complex devices have 3 levels:
– "Plant"
– "Partial plants"
– "Data points"
7.2.1 "Plant" level
Enter the "Plant" level as follows:
· Click the "Energy indicator" function (primary navigation) or
· Click the "Plant state Energy indicator" pane.
The "Plant" level shows all devices of a plant subject to the "Energy indicator"
function.
The "Energy indicator" of the plant is displayed as a summary display in the
"Plant state Energy indicator" pane. See Section 7.2.6 for information on the
summary display.
The "Energy indicator" for devices is displayed at the "Plant" level in the "Energy
indicator" column for each device.
Clicking the name of a device in secondary navigation or in the "Device name"
column opens the next lower level for that device.
"Energy indicator" (tree leaf) for each actively monitored device.
This column also contains:
· Checkboxes to activate/deactivate monitoring of the "Energy indicator" data
points for the selected device.
· Summary checkbox (green/red) to activate/deactivate monitoring for all data
points of the plant.
The summary checkbox is available only for access level "Administrator"; see
Section 7.3.4.
When a checkbox is cleared (deactivated), message "Monitoring off, green
limits reset to default values! Really to be continued?" is displayed; see Section
7.3.4.
Level designations
Enter the
"Plant" level
"Energy indicator"
for a plant
"Energy indicator"
for devices
Next lower level
Table columns
Energy indicator