Commissioning Instructions

110 / 182
Siemens Web server OZW772... V7.0 CE1C5701en
Building Technologies "Energy indicator" function 2017-07-03
The values of the data points "Energy indicator transmitted" and "Reason" are
displayed after testing until:
 Another test is triggered manually.
 The next transmitted e-mail is transmitted as per Transmit time 1 and/or 2.
 The device supply is switched on and off.
Data point
Function
Test receiver
[ ---, trigger]
"Energy indicator transmitted"
[ ---, Yes, No]
Reason
[ ---, DNS setting, mail server address, mail
server port number, e-mail address Receiver,
mail server authentication, network cable]
Manual triggering for test purposes does not trigger a fault message.
If an e-mail with "Energy indicator" of the plant is not transmitted without error,
a fault message is triggered for the corresponding e-mail Receiver.
The fault message is reset if:
 The next transmitted e-mail is transmitted as per Transmit time 1 and/or 2.
 Manually triggered "Test receiver" is successful.
The diagnostic options are identical to those of other e-mail Receivers.
7.5.2 Mail inbox
"Energy indicator
transmitted" and
"Reason"
Note
Fault message e-mail
Reset
fault message
Note