Commissioning Instructions

169 / 182
Siemens Web server OZW772... V7.0 CE1C5701en
Building Technologies Appendix 2017-07-03
The RNDIS driver is supplied on the web server at http://<IP-Adresse>/drivers/
can be accessed via Ethernet connection (see Section 8.1.2, Access via Local
area network (LAN).
The driver is not supplied with web server as of V7.0 since it is no longer required.
The driver Siemens_RNDIS_Driver_x64.msi is installed on a 64-bit operating
system; on a 32-bit operating system Siemens_RNDIS_Driver_x86.msi. The
installation file for the driver can be executed directly on the PC. Following the
steps for the installation wizard.
The RNDIS driver is now installed.
The PC can communicate with the web server via USB.
The RNDIS driver is installed as part of the ACS790 Siemens software installation.
11.3.4 Alternative network configuration
We recommend setting up IP settings for commissioning as an alternative
configuration if a PC, connected to a network, is temporarily used to commission
the web server and the local area network.
On the PC, set as follows:
1. Select Start > Control Panel > Network connections > Local Area Connection.
2. Select the "General" tab.
3. Click [ Properties ]
4. Select "Internet Protocol (TCP/IP)".
Manual
installation
Result
Note
Alternative
configuration