Commissioning Instructions

17 / 182
Siemens Web server OZW772... V7.0 CE1C5701en
Building Technologies Commissioning 2017-07-03
2.2 Getting started
2.2.1 Turn on web server
Connect the web server to the power supply and connect it to the PC:
1. Connect power supply to turn on power on web server. The web server is
operational, when the green LED is lit.
2. Check additional displays:
 LED
Green light if the KNX bus power supply is available. Check KNX bus
wiring and setting for bus power supply on the KNX devices if no bus
power supply is available.
 LED
Dark if no fault pending. You can troubleshoot pending faults later (see
Section 4.3).
3. Plug the supplied USB cable into the web server and the PC and start up
the PC. The PC recognizes the web server as a USB device.
No RNDIS driver is installed for web server as of V7.0.
The RNDIS driver is automatically installed on prior versions of OZW version long
as the Microsoft online update service is enabled and the PC is connected to the
Internet. The RNDIS driver can also be manually set up (see Section 11.3.3).
Turn on web server
Notes