Instruction Manual

Turning off an instrument with

audio shoe attached

Press the audio shoe up in the

back, until the battery compart-

ment opens and catches on the

first stop.

Removing the audio shoe

Press the audio shoe toward the

front. Then unhook it and close

the audio input flap.

Safety Instructions for hearing systems with audio input

The audio input may be connected to line-operated equipment

only if the equipment fulfils the safety requirement IEC 65 / DIN

VDE 0860.

Note when controlling your ACURIS instruments audio

input with the ePocket:

If an audio shoe is attached to one or both of your ACURIS

hearing instruments, the program button on the ePocket

or on the instruments can be used to select the audio mode

(such as only audio, only microphone, or audio and micro-

phone). The volume can be changed normally using the

ePocket.

If you are wearing one ACURIS hearing instrument with

audio input capability and one without (for example, if you

are wearing a Behind-the-Ear instrument and In-the-Ear

instrument), the instrument with the audio shoe connected

cannot be controlled using the ePocket.

010604402_Siemens_UG_Acuris_Bte 19.12.2005 11:20 Uhr Seite 18