Technical data
Setting Up and Operating the Computing Unit
3-14
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
3.6 Drives
3.6.1 CD-ROM drive (depending on hardware configuration)
Note
The EJECT function offered by various applications for opening the CD-ROM tray
does not work with this drive.
Once you have closed the tray, the CD is tested and the access LED on the drive
starts to flash:
– If the LED flashes continually, the CD is faulty but can still be read.
– If the LED flashes several times and then remains list, the CD you have
inserted is defective and cannot be read.
– The access light is normally on when reading information from the CD.
CD-ROM front
Emergency ejectAccess lightTray Eject button
Figure 3-9 CD-ROM Front
Caution
Danger of data being lost and the drive damaged
CD-ROM drives are very sensitive to unacceptable vibrations. During operation,
vibrations might damage the drive and/or the data medium. You can read the
permissible values in the technical specifications in Chapter 7 of the instruction
manual.