Technical data

Configuring the Computing Unit
5-10
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
Numlock Switches Numlock on or off following power on
Key Click A keystroke can be heard.
Keyboard auto-repeat rate Increase in automatic key repeat rate
Hardware Options
The system goes to the following submenu when you select this menu option:
PhoenixBIOS Setup Utility
Item Specific Help
ESC EXIT
Select Item
Select Menu
+ / –
Enter Select
Change Values F9
F10
Setup Defaults
Save and Exit
Sub-Menu
PCI - MPI / DP:
Main
Hardware Options
[Enabled]
Enable or disable the
PCI - Multi Point
Interface (MPI / DP)
Trackball / PS/2 Mouse:: [Auto]
CRT / LCD selection: [SIMULTAN]
CRT 640 X 480: [75 Hz]
CRT 800 X 600: [75 Hz]
CRT 1024 X 768: [75 Hz]
LCD-Screensize: [Graph& Text Expand]
Cardbus/PCMCIA Slot:
[Enabled]
F1 Help
Ethernet Address: [080006247000]
SafeCard functions: [Enabled]
Legacy USB Support: [Disabled]
On Board Ethernet [Enabled]
DSTN Contrast:
[154]
Figure 5-8 Hardware Options Submenu
The parameters of the interfaces present on the basic board are set here.
Entry Meaning
PCI-MPI/DP Enables the CP5611-compatible MPI/DP interface. The resources are
managed by the BIOS PCI Plug&Play mechanism.
On Board
Ethernet
Enabled The Ethernet port on the basic board is enabled.
Disabled The Ethernet port on the basic board is disabled.
Ethernet
Address
The individual Ethernet address is entered here.
Card bus /
PCMCIA Slot
Disabled Disables the Cardbus/PCMCIA interfaces.
Enabled The resources are managed by the BIOS PCI Plug&Play
mechanism.
SafeCard
functions
Enabled On-board monitoring functions are enabled.
Disabled No monitoring functions.
The relevant driver and application must be started for operation of the
monitoring functions.