Data Sheet for Product

ManualsBrandsSiemens ManualsFire - EvacuationCerberus PACE system mountinng and installation

Cerberus PACE

Digital audio matrices, Ethernet switches, media converter

PC2001-A1, PC2002-A1, PC2003-A1, PC2005-A1, PC2006-A1, PN2001-A1, PN2005-A1,

PN2007-A1, PN2008-A1, PNA2002-A1, PNA2003-A1, PNA2004-A1, PNA2007-A1

EN 54-16-certified audio input and output components for demanding digital

and network-based public address and evacuation applications

● Fully redundant configurable system with no single point of failure

● Ethernet interface ('PACE-Net') for networking of the system components

● Serial interface ('PACE-Bus') for connecting to internal and external components

● Real-time configuration, remote maintenance, and remote monitoring via the

PACE-Design system software

● Real-time audio transmission and integrated real-time recorder for delayed

announcements

● Analog audio inputs and outputs, plus analog and logic control inputs and outputs

● Automatic volume control, compressor and limiter

● Standard '100 V' speaker lines in bulk or zone configuration

● Speaker line monitoring with impedance monitoring or EOL element

● Speaker line monitoring and short-circuit isolation with Loop isolators

● Integrated micro SD card reader for alarm messages and music

● Compatible, industry-standard network components available

● ('PACE-Net') Networking via copper cables or fiber-optic cables

A6V10430497_en--_c

Smart Infrastructure

2021-06-30

Summary of content (24 pages)

PAGE 1
Cerberus PACE Digital audio matrices, Ethernet switches, media converter PC2001-A1, PC2002-A1, PC2003-A1, PC2005-A1, PC2006-A1, PN2001-A1, PN2005-A1, PN2007-A1, PN2008-A1, PNA2002-A1, PNA2003-A1, PNA2004-A1, PNA2007-A1 EN 54-16-certified audio input and output components for demanding digital and network-based public address and evacuation applications ● ● ● ● ● ● ● ● ● ● ● ● ● A6V10430497_en--_c 2021-06-30 Fully redundant configurable system with no single point of failure Ethernet interface ('PACE-Net
PAGE 2
Use System Cerberus PACE is a network-based public address and voice alarm (PA/VA) system that complies with the requirements of EN 54-16 and allows for a decentralized and redundant system structure. It is an important feature of the system that the critical risks of single point of failure vulnerabilities are eliminated. A typical Cerberus PACE system is comprised of digital audio matrices, amplifiers, operating terminals, and call stations.
PAGE 3
Ethernet switches Ethernet switches are used to connect individual Cerberus PACE network components, such as Cerberus PACE audio matrices and call stations. The Ethernet switches can be connected to a 'PACE-Net' network of up to 1350 network participants. The Cerberus PACE network component features two independent network connections. These Ethernet connections combined with Ethernet switches can be used to build a fully redundant network.
PAGE 4
Features and Functions Digital audio matrices PC2001-A1 'Digital audio matrix (4/4/4)' ● ● ● ● ● ● ● ● ● ● ● ● ● ● PC2002-A1 4 analog audio inputs and 4 analog audio outputs 4x 100 V speaker lines 8 logic control inputs and 8 logic control outputs 8 analog control inputs 19'' / 1 HU housing Ethernet-based 100 Mbit/s network interface Serial interface 'PACE-Bus' (RS485) to communicate with internal and external components Integrated micro SD card reader for alarm messages and music Simultaneous transmissi
PAGE 5
PC2003-A1 'Digital audio matrix (4/4/16)' ● ● ● ● ● ● ● ● ● ● ● ● ● ● PC2005-A1 'Digital audio matrix no supervision (4/4/0)' ● ● ● ● ● ● ● ● ● ● PC2006-A1 4 analog audio inputs and 4 analog audio outputs 16x 100 V speaker lines 8 logic control inputs and 8 logic control outputs 19'' / 1 HU housing Ethernet-based 100 Mbit/s network interface Serial interface 'PACE-Bus' (RS485) to communicate with internal and external components Integrated micro SD card reader for alarm messages and music Simultaneous
PAGE 6
Ethernet switch PN2001-A1 'Ethernet switch (2x4/2)' ● ● ● ● ● ● ● PN2008-A1 'Ethernet switch (1x4, DIN rail)' ● ● ● ● PN2005-A1 2 separate Ethernet switches in a single housing 2x 4 copper ports (RJ45, 10/100/1000Base-T) 2x fiber-optic ports (duplex SC) Supports chain and tree topologies 19'' / 1 HU housing Enables the user to create a fully duplicated network Operated on DC 24 V using EN 54-4-certified power supply units 1x 4 copper ports (RJ45, 10/100/1000Base-T) Supports chain and tree topologies 2
PAGE 7
Media converter PN2007-A1 'Planet IGT-805AT Media Converter' ● ● ● ● ● ● ● ● ● Ethernet media converter from CAT5 copper to fiber-optic 1x copper ports (RJ45, 10/100/1000Base-T with auto MDI / MDI-X function) 1x SFP interfaces (100/1000Base-X dual-mode with auto-detection) to incorporate a fiber-optic section (fiber-optic adapter required) Slimline IP30 metal housing for demanding industrial environments -40 to +75 °C operating temperature DIN rail and wall mounting model Redundant power supply with rever
PAGE 8
PNA2004-A1 'D-Link DEM-211 FOI Adapter' ● ● ● ● ● ● MM transceiver module for fiber-optic data transfer SFP form factor for insertion into an SFP interface Can be inserted during operation Conforms to SFA multi-source agreement (MSA) Duplex LC port Max.
PAGE 9
Type Designation Order number PC2005-A1 PC2006-A1 Digital audio matrix no supervision (4/4/0) Digital audio matrix no supervision (0/4/0) S54451-B76-A1 S54451-B77-A1 Housing type 19'' / 1HU W x H x D mm 482 x 44 x 180 Weight 3.0 kg Inputs and outputs Audio inputs 0 dB (external source) 4 0 Audio outputs 0 dB (to amplifier / external) 4 Number of 100 V speaker lines 0 Analog control inputs 0...
PAGE 10
Ethernet switch Type PN2001-A1 PN2008-A1 PN2005-A1 Ethernet switch (2x4/2) Ethernet switch (1x4, DIN rail) Planet IGS-10020MT Switch Order number S54451-B4-A1 S54451-B84-A1 S54451-B5-A1 Housing type 19'' / 1HU Designation W x H x D mm Weight DIN rail open frame model DIN rail and wall mounting model 482 x 44 x 125 72 x 30 x 71 56 x 135 x 88 2.4 kg 0.1 kg 0.
PAGE 11
Media converter Type PN2007-A1 Designation Planet IGT-805AT Converter Order number S54451-B44-A1 Housing type DIN rail and wall mounting model W x H x D mm 32 x 135 x 87 Weight 0.46 kg Connections Ethernet ports (RJ45) 1 Fiber-optic ports 1x 100/1000Base-X SFP interface Power supply DC 12...
PAGE 12
Accessories You will find more information on suitable accessories in the data sheet with document ID 'A6V10430563'. Device combinations Fiber-optic adapter All Cerberus PACE fiber-optic adapters are compatible with all Cerberus PACE network components that are equipped with an SFP interface. Use the fiber-optic adapter PNA2004-A1 for the Ethernet switch PN2005-A1 or the media converter PN2007-A1 if you wish to link the Ethernet switch PN2001-A1 to these components using a fiber-optic cable.
PAGE 13
Product documentation You will find more information on the Cerberus PACE system and its components in the following documents: Title Document ID IT security policies Cerberus PACE – IT security policies A6V11439692 System documentation Cerberus PACE – planning A6V11244536 'PACE-Design' – configuration A6V10429097 Cerberus PACE – mounting / installation A6V10430579 Cerberus PACE – operation A6V10430571 Data sheets System data sheet A6V11243351 19" cabinets A6V10429243 Digital audio matrix A
PAGE 14
Notes Safety CAUTION National safety regulations Failure to comply with national safety regulations may result in personal injury and property damage. ● Observe national provisions and comply with the appropriate safety regulations. Disposal The device is considered an electronic device for disposal in accordance with European Directive and may not be disposed of as domestic waste. ● Use only designated channels for disposing the devices.
PAGE 15
Technical data Digital audio matrices PC2001-A1 PC2002-A1 PC2003-A1 PC2005-A1 PC2006-A1 Supply Power supply DC 24 V (18...32 V) Current consumption 0.3...0.37 A 0.5...5 A 0.3...0.37 A Number of inputs / outputs Audio inputs 0 dB (External source) 4 0 Audio inputs 100 V (Amplifier) 4 4 0 4 Audio outputs 0 dB (to amplifier / external) 0 4 Speaker lines 100 V 4 16 0 Analog control inputs 0...
PAGE 16
PC2001-A1 PC2002-A1 PC2003-A1 PC2005-A1 PC2006-A1 Audio inputs 100 V Max. power 500 W ‒ Max. current 5A ‒ Fault indicator relay Contacts Potential-free contact: max. AC / DC 48 V / 500 mA Interfaces Serial interfaces 1x RS232 / RS485 9600, 19200, 57600, 115200 baud Ethernet connection 100Base-TX 2x RJ45 Audio properties Frequency band 20 Hz...20 kHz / ±0.5 dB Distortion factor 20 Hz...20 kHz / ±0.5 dB <0.005 % Total dynamic range Inputs: 40 Hz...20 kHz / -1 dB 103 dB Symmetrical max.
PAGE 17
PC2001-A1 PC2002-A1 PC2003-A1 PC2005-A1 PC2006-A1 Ambient conditions Operating temperature -5…+40 °C Storage temperature -20…+70 °C Operation in humid environments (without moisture condensation) 10...90 % rel. Storage in humid environments (without moisture condensation) 5...90 % rel. Dimensions and weights W x H x D mm Weight 482 x 44 x 180 482 x 44 x 357 482 x 44 x 180 3.1 kg 8.5 kg 3.
PAGE 18
Ethernet switch PN2001-A1 PN2008-A1 PN2005-A1 DC 24 V (18...32 V) DC 24 V (18...32 V) DC 12...48 V or AC 24 V mains adapter 160 mA, +10 mA per active port 50 mA, +10 mA per active port ‒ 260 mA 100 mA 415 mA 6.3 W (at full load) 2.4 W (at full load) 10 W (at full load) 2 - ‒ 2x 4 4 8 2x fiber-optic ports on SC connection - 2x 100/1000Base-X SFP interface 1310 nm - ‒ Multi-mode - ‒ IEEE 802u 100Base-TX, 100Base-FX Standard, IEEE 802.3 10Base IEEE 802u 100Base-TX IEEE 802.
PAGE 19
PN2001-A1 PN2008-A1 PN2005-A1 IP30 - IP30 ~RAL 7035 - Black Protection category and color Protection category (IEC 60529) Color Standards EN 54-16 19 Smart Infrastructure A6V10430497_en--_c 2021-06-30
PAGE 20
Media converter PN2007-A1 Supply Power supply Power consumption DC 12...48 V or AC 24 V line adapter ~3.3 W at full load Interfaces Ethernet interface: ● Copper 1x RJ45, 10/100/1000Base-T ● Fiber-optic ports 1x SFP interface 1000Base-X ● Ethernet standards IEEE 802.3x Ambient conditions Operating temperature -40…+75 °C Storage temperature -40…+75 °C Operation in humid environments (without moisture condensation) 10...90 % rel.
PAGE 21
Repeater PNA2007-A1 Supply Power supply Current consumption DC 24 V (18…32 V) 80 mA when idling 10 mA per active port 130 mA at full load Interfaces Serial interfaces Network standards RS232 (for configuration only) Conforms to IEEE 802.3, 100Base-TX, 100Base-FX, 10Base Ambient conditions Operating temperature -5…+40 °C Storage temperature -20…+70 °C Operation in humid environments (without moisture condensation) 10...90 % rel. Storage in humid environments (without moisture condensation) 5...
PAGE 22
Fiber-optic adapter PNA2002-A1 PNA2003-A1 PNA2004-A1 Supply Power supply 3.3 V Interfaces Housing type SFP (Small Form Factor Pluggable) Fiber-optic ports: ● Port type ● Max. cable length ● Fiber type ● Ethernet standards ● Wavelength Duplex-LC 10 km 550 m Single mode 2 km Multi-mode IEEE 802.3ab/802.3z 1000 Mbit/s 1310 nm 850 nm IEEE 802.
PAGE 23
PAGE 24
Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug +41 58 724 2424 www.siemens.com/buildingtechnologies Document ID A6V10430497_en--_c Edition 2021-06-30 © Siemens Switzerland Ltd, 2018 Technical specifications and availability subject to change without notice.