Data Sheet for Product

27
Smart Infrastructure
A6V11868429_en--_b
2021-03-12
FDCIO221
'Input/output module FDnet/C-NET'
● Input/output module FDCIO221:
– Control output with potential-free relay contact for activation of alarming
devices, fans, air conditioning systems, lift controls, etc.
– Monitored contact input for reporting technical statuses or activating an
alarm
– Use as a monitored output with a separate power supply, e.g., for
operating acoustic signal transmitters
● LED indicator for input/output statuses and for fault, test and localization
● Power supply and communication via FDnet/C-NET (addressed individually)
● Address automatically issued during commissioning
● Two-wire installation for all cable types
FDCIO222
'Input/output module FDnet/C-NET'
● Input/output module FDCIO222:
– Four control outputs with potential-free relay contacts for activation of fire
doors, fans, air conditioning systems, lift controls, etc.
– Four monitored contact inputs for confirming technical statuses or
activating an alarm
● LED indicator for input/output statuses and for fault, test and localization
● Power supply and communication via FDnet/C-NET (addressed individually)
● Address automatically issued during commissioning
● Two-wire installation for all cable types
FDCIO223
'Input/output module FDnet/C-NET'
● Two monitored inputs/outputs, which can optionally be used as follows:
– Collective detector line/conventional detector line
– Contact input
– Control output
– Control output with confirmation
● LED indicator for input/output statuses and for fault, test and localization
● Power supply and communication via FDnet/C-NET (addressed individually)
● Address automatically issued during commissioning
● Two-wire installation for all cable types
● Pluggable connection terminals
● DC 24 V external power supply (detector lines electrically isolated)
● Microprocessor-controlled signal processing
● Communication via FDnet/C-NET (addressed individually)