Data Sheet for Product

7
Smart Infrastructure
A6V11940275_en--_b
2021-03-12
PCA2018-A1
'MeanWell SD-100B-24 DC/DC'
● Controlled DC 24 V (100 W) output voltage, electrically isolated
● Internal 24 V energy supply protected against short-circuits on the external
24 V supply line outside the system cabinet
● Protected against short-circuit, overloading and overvoltage
● DC 1500 V I/O isolation
● 100 % full load burn-in test
● Fixed switch frequency of 83 kHz
I/O interfaces
PCIO2001-A1
'Input/Output extension (digital 16)'
● For use with all digital audio matrices
● Communication via 'PACE-Bus' (RS485) or (RS232) interfaces
● Extends a digital audio matrix by additional 16 digital outputs
● Outputs are electrically isolated
● Extends a digital audio matrix by additional 16 digital inputs
● Extends a digital audio matrix by additional 8 analog inputs
PCIO2002-A1
'Input/output module (digital, 16)'
● For use with all digital audio matrices
● Communication via 'PACE-Bus' (RS485) interfaces
● Extends a digital audio matrix by additional 16 digital inputs
● Extends a digital audio matrix by additional 8 analog inputs
● Extends a digital audio matrix by additional 8 digital relay outputs
● The component includes 8 relays with 2-pole changeover contacts
● The maximum permissible switching current for each changeover contact is
5 A / 100 V
● Installation in the system cabinet (TS35 DIN-rail-ready)
PCO2002-A1
'Output module (relay, 8)'
● For use with all digital audio matrices
● Communication via 'PACE-Bus' (RS485) interfaces
● Extends a digital audio matrix by additional 8 digital relay outputs
● The component includes 8 relays with 2-pole changeover contacts
● The maximum permissible switching current for each changeover contact is
5 A / 100 V
● Installation in the system cabinet (TS35 DIN-rail-ready)
PCO2003-A1
'Output extension (relay, 8)'
● Extension module for PCIO2002-A1 and PCO2002-A1
● Communication via 'PACE-Bus' (RS485) interfaces
● Extends a digital audio matrix by additional 8 digital relay outputs
● The component includes 8 relays with 2-pole changeover contacts
● The maximum permissible switching current for each changeover contact is
5 A / 100 V
● Installation in the system cabinet (TS35 DIN-rail-ready)