Configuration Instructions

Configuration pages – Overview
'Basic Station Configuration'
6
A6V10429097_en--_e
101 | 219
Info Updated
Date of the latest station configuration change.
Overall Updates
Counter of all configuration changes.
Station Priority
This value is used by call stations to show the user if a call is heard in an output
zone. The value determines the color of the zone selection LEDs. 0 has the lowest
priority, 15 has the highest priority.
A priority > 7 will switch the station from business mode to alarm mode. In alarm
mode, all calls are identified as alarm/evacuation calls. A fire brigade call station
must always have the highest priority.
IBM
● The 'Info Button Mode' determines the mode of a device's info button, if such a
button is present.
<Default>
Default behavior, depends on the device
<FaultReset>
Manual reset of fault indications, see also '8.7 in EN 54-16'.
This reset state is distributed over the network. Applicable to
'Digital audio matrix (4/4/16)' and Cerberus PACE Compact
digital audio matrix board devices.
VLAN ID
● Reserved for future use.
(VLAN) Priority
● Reserved for future use.
SMM Priority
This setting defines which modules are preferred as sync masters.
The module with the highest 'Sync Master Module Priority' will become the master.
The master creates a synchronisation signal, which is used to synchronize the
analog outputs. The master will be displayed in 'PACE-Design' with a blue
background.
Ideally choose the sync master at a network node with few hops to all end points,
with 24/7 power supply and a low chance of network problems.
Station Features
You can enable the following software features:
Function
Description
AudioFeed
The station can feed a network channel
AudioOut
The station can receive a network channel
InhibitSMM
Inhibit Sync Master Module
ExtUART
Enable the external serial interface
ExtUART2
Enable the second external serial interface
FireFighter
A fire fighter call station is built in a firefighter case
PilotAmp
A PC2003 is equipped with an internal pilot tone amplifier.
Required
The station periodically sends information that is required for the system to
work.