Configuration Instructions

Configuration pages – Overview

'Audio Output Processing'

A6V10429097_en--_e

119 | 219

Fig. 74: Context menu

With this context menu you can copy & paste filters and name the given output.

The display options enable you to extend the current view.

6.5.1 Equalizer audio output

'Filter Type'

You can select up to four different equalizers per output in the 'Filter Type'

dropdown menu. Every filter is configured separately. The envelope of all active

filters is displayed at the bottom of the screen.

The following filter types are available for selection:

Fig. 75: Filter types for selection

High and low pass filters, parametric filters (peak), and shelving filters are available

for each of the four equalizers. Third and fourth order filters are only available for

the first two filter bands.

'Gain'

Depending on the selected filter type, the gain (amplification) has a valid range

between -15…+15 dB.

'Frequency'

The center frequency of the filter is adjustable from 20 Hz…20 kHz.

In peak mode the center frequency is adjusted, while in all other modes, the cut off

frequency at -3 dB is configured.

'Quality'

The quality factor of the filter (peak) is adjustable from 0.05 (wide) to 100 (narrow).