Configuration Instructions

Configuration pages – Overview

'Peripherals and Supervision'

124 | 219

A6V10429097_en--_e

'UART Protocol'

Choose from various supported serial protocols.

External Real Time Clock

This is an implementation to synchronize the time from an external time provider

(GPS clock, DCF77 receiver) to the network participants. The connected device

needs to be able to send a 'Meinberg Standard Telegram' in the format:

It is also mandatory that the connected clock signs the telegram with the

“synchronous” flag. Using the DCF77 module C600RS you need to set 'always

synchronous'.

PACE-Bus Protocol

This protocol is used to communicate with all BUS participants.

Media Control Protocol

Used to interface with media control units. Offers an easy-to-use but very flexible

way to control the system and read out error states.

Digital I/O Extension

Using this protocol you need to connect a relay 8 extension module (PCO2003).

PTO2001 Keypad Extension

Exclusive for the PT2001-A1 to communicate with the keypad extensions.

LCD display protocol

Specialized protocol to control the device (not available for all device types)

Process the CSLL

This protocol is used to transfer up to 16 volume levels.

Process the RSL

This protocol sends the error status of all devices in the Required Station List on a

cyclic basis.

General debugging or other protocol

(E.g. system error logging protocol)

These protocols are used for debugging purposes only and have no practical

function for the user.