Configuration Instructions

Configuration pages – Overview
'Peripherals and Supervision'
6
126 | 219
A6V10429097_en--_e
6.7.2.5 Acoustic Signal
Can only be used for 'Desk call stat. (19 buttons)' (internal speaker at audio
output 1), has the same function as the output of the system fault buzzer on the
indication board.
6.7.2.6 Audible warning, Remote triggered
See chapter 'EN 54-16 – Specific settings [➙ 47]'.
6.7.3 CSLL UART List
Fig. 81: CSLL UART List
In the 'Cyclic Station Logging List' (CSLL), the output level of every output zone
configured in this view is transmitted via the external UART interface.
This data is available for computing, monitoring or displaying the levels on an
external panel computer.
● Set the external UART protocol to 'Process CSLL (Cyclic Station Logging List)'
to switch on the CSLL.
● Click on 'Add all Stations' to add all currently online stations to the CSLL.
● Click on 'Delete all' to clear the whole CSLL.
● Press and hold the <Ctrl> button on the PC keyboard, then click on 'Add all
Stations' to open a dialog which lets you add a single station.
● Click on 'Delete selected' to clear the currently selected station from the CSLL.