Configuration Instructions

Configuration pages – Overview
'Peripherals and Supervision'
6
A6V10429097_en--_e
127 | 219
6.7.4 Network
Fig. 82: Network
The stations with a redundant network connection line are specified in the 'Network
Station List' (NSL).
'Edit NSL'
During the time the NSL is being edited, the DSP’s NSL will not be updated. This
prevents the network connection from possibly being lost during configuration, as
the station thinks it should switch to the other network connection line.
'Check NetRedundancy'
Activates the redundancy check of the connected network based on the NSL.
6.7.5 PACE-Bus (RS485/RS232)
The serial 'PACE-Bus' can manage up to 16 'PACE-Bus' users with different device
types.
To configure a device, you need to select the hardware first via the 'Device N, ID='
dropdown menu.
If a new device has been detected, or a device can no longer be reached, then
you will have to approve this by selecting the device and clicking the 'Accept'
button.