Configuration Instructions

Hardware specific configuration

'Zone Select Table – Regular Keypad'

148 | 219

A6V10429097_en--_e

● The 'priority call' function of a 'Desk call stat. (19 buttons)' or a virtual call

station is specified with zone selection buttons.

● Every zone selection button contains a list of addressed audio outputs, which

will trigger the 'priority call' when activated.

● The 'Zone Select Table' page displays the specified addressed outputs of a

single zone selection button or all defined output zones.

Fig. 97: 'Zone Select Table' page

If you make changes on the 'Zone Select Table' page during an active call, you

must first cancel the selection/specification of the zone selection button

concerned, then reselect it to enable the list in the device.

● Deselecting the 'Enable' checkbox cancels the entire selection assigned for the

listed station.

● If disabled, a call will not address the selected station.

● Double-click on the empty space beneath the columns 1…16 to add additional

lines to a button.

Adding zones

◈

Add additional zones via the context menu (right-click in the window).

You can select the following options:

● 'Add Zone > Speaker Lines > 'Digital audio matrix (4/4/16)' > Line 1…16'

● 'Add Zone > Zones > Audio Output'

● 'Add Zone > Stations > Station ID > Audio Output'

The context menu contains further options and functions, including the 'Verify Zone

Select Table [➙ 186]' function.