Configuration Instructions

Hardware specific configuration
'Logic Outputs – Connector'
7
A6V10429097_en--_e
151 | 219
Function
Description
AVC Monitoring Fault
Faults on the AVC monitoring device are detected, the AVC calculation is
skipped, and the AVC value is not attenuated (also see chapter 'Setting up
automatic volume control (AVC) [➙ 64]').
'Talk', 'Zone Select', 'Select
All', 'Select None'
'Desk call stat. (19 buttons)' functions controlled via digital inputs.
Amplifier sense
For connection to the fault relays of an amplifier. Used in the backup concept
to determine whether the program amplifier is working correctly and, in case of
a fault, to switch to a backup amplifier.
'GP' flag:
● If set, then configure as a 2-way backup amplifier
● If not set, then configure as a 1-way backup amplifier
'General purpose
(informational)', 'Amplifier
sense', 'Temperature sensor
(informational)', 'Other
(informational)'
General purpose inputs.
Parameters
Description
'Parameter 'Wave #''
Name of the SD file. Example: 4 means '004.wav'.
'Key ID'
Optional key press ('Emulate Keypad Key'); should be a zone select key,
which contains the zones to evacuate.
'of Station'
Station ID of the module containing the alarm file.
'GP'
When the parameter is enabled, the alarm triggers a global call.
7.6 'Logic Outputs – Connector'
Use this configuration window to manage the hardware digital outputs and optional
digital output extension cards like the IOExpander.
The list has eight outputs by default. Additional entries will be displayed if an
extension is detected.
Fig. 100: 'Logic Outputs – Connector' page
'Pulse Time on activated Pulse Mode'
If the Pulse Mode flag of a function is enabled, it will switch to active high for the
configured period of time.