Configuration Instructions

System Protection
Adding a factory-protected module
8
A6V10429097_en--_e
167 | 219
8.6 Adding a factory-protected module
You will find information on how to unlock the system in chapter 'Unlocking a
protected System [➙ 164]'.
Add a new 'factory-protected' module to an existing protected
system
1. Log into the factory-protected 'Siemens_Factory' system and into the system
that you want to incorporate.
2. Open the 'Basic Station Configuration' page of the module you want to
integrate into a new system.
Fig. 112: Basic Station Configuration
3. Click the pencil icon to enable the 'System Name' field.
4. Select a system to incorporate.
5. Follow the guidance in the messages displayed.
Fig. 113: 'Leave the Protected System' dialog
Fig. 114: 'Join the Protected System' dialog
 The factory-protected module is added as a member of the new group.
6. Repeat the process for each additional module that you wish to integrate.
7. Verify and correct the system participants manually by selecting
'Extras' > 'System Protection'.