Configuration Instructions

Maintenance and system operation
'Extras' > 'Station' menu
10
188 | 219
A6V10429097_en--_e
Fig. 137: 'Select snapshot' dialog
A dialog similar to this one will be displayed if you select a snapshot located on the
local computer.
10.1.5 Reset Station to the Factory Settings
The Factory Settings are applied to the selected module. The actual configuration
will be discarded.
NOTICE
Data loss
Reconfiguration required
● Please note that all configuration data is replaced, i.e., all data on all
configuration pages and the fields of the Basic Station Configuration' page.
● 'Station Name' is taken from the factory setting.
● 'Location' and 'additional text' are cleared.
There are factory settings for each device type, including the 'Fire brigade call
station'.
If you use the 'User Settings', only the configuration – i.e., all data on all
configuration pages – will be applied to the device.
1. Select a Station in the System Overview Tab
2. Click on the icon ('Extras', 'Statistics') to send the factory settings to
the device